Construction Vehicle & Site Navigation Signs

Construction Site Traffic Control

It's a well-known fact that construction sites tend to be dangerous, which is why it's important to reduce the risk of potential accidents, including those posed by vehicles. Vehicle and site navigation signs are an effective way of doing this, especially as drivers are used to responding to traffic signs, and therefore will respond to similar on-site signs.

Such signs are very practical, since construction sites can be chaotic, confusing places and can be hard for drivers - especially visiting drivers - to navigate, which can lead to them getting lost or even, at busier times, causing traffic jams. However, if you clearly mark the points of interest, such as the nearest way to the reception, these issues are far less likely to arise.

By installing vehicle and site navigation signs, you communicate with drivers in advance, giving them the time to process instructions and incorporate them into their driving and navigating. For example, you may decide to put up a caution 5 site speed limit sign, caution speed ramps sign or reception car park navigation sign.

Sometimes, something unpredictable will happen, it is important to be prepared for such occurrences, especially if they impact work flow on your site. Before dealing with these situations, you can set up one of our signs to make sure drivers miss obstacles entirely, a no entry sign or diversion sign would be perfect to use on such occasions. It is also ideal to have a supply of traffic cones handy in the event of accidents to help cordon off the area, and make it clear to drivers the space that they should avoid.

Vehicle and site navigation signs can also be used to warn drivers of pedestrians and turning lorries, instruct them to sound their horn and drive slowly, notify them of exits, entrances and site offices and much more.

These types of signs have a lot in common with typical construction site information signs, alerting drivers any dangers they may come across while on-site. You can complement them with construction site parking signs that let drivers know where they can safely leave their vehicles and where doing so is strictly forbidden.

You will want to place these signs strategically, so that any confusion is eliminated. Drivers should be able to see vehicle and site navigation signs from afar to allow them ample thinking time. Vehicle and site navigation signs are available in various designs, shapes and sizes, so you'll be able to find models that meet your requirements.

In the unlikely event you're unable to find something suitable, you can use our custom sign designer to quickly and easily create construction site signs tailored to your exact needs.

Our vehicle and site navigation signs meet the strictest of requirements and are built to last, so they won't fade when exposed to direct sunlight.

Check out our sign fixings to find solutions for safely securing vehicle and site navigation signs to a range of surfaces.

Types of Construction Vehicle Signs

All construction sites need bold and unobstructed construction site entrance signage, construction traffic signs and directional signage, along with other site-specific signs such as those warning of people working overhead.

Seton has a full range of signs to help you organise construction site or general worksite traffic, including car parks. Our signs are built-to-last and easy to read; they can be affixed to surfaces such as fences, walls and posts to ensure maximal visibility to drivers. They can also be attached to stanchion sign holders for portability.
Here is our easy guide to the different categories:

• Site Entrance/Exit Signs – Used to signpost the site itself and ensure that visitors use the correct entrance/exit. Examples: Site Entrance; Delivery Entrance; All Traffic Turn Left/Right When Leaving signs.


• Directional Signs – Required to organise the traffic flow and help all visitors to navigate the site safely. Examples: Reception – Right/Left Arrow; Site Office; Exit Only/Do Not Enter signs.


• Site Safety Signage – Designed to facilitate safe passage through the site for both drivers and pedestrians. Examples: Speed Limits; Caution Pedestrians; Drive Slowly signs.


• Pedestrian Signs – Used to demarcate safe routes for pedestrians. Examples: Pedestrian Entrance; Pedestrian Route; Footpath Closed signs.


• Traffic Warning Signs – Your risk assessment will help you identify special areas of risk to drivers and pedestrians. Examples: Beware Pedestrian Crossing; Caution Lorries Turning; Drivers Beware – Look Both Ways signs.


• Restricted Access Signs – Essential to flag up hazards or areas of special risk to staff and visitors. Examples: Works Access; Works Traffic Only; No Entry signs.


• Site Security Signage – Used to protect vehicles and equipment when site is not in use. Example: No Tools Left in this Vehicle Overnight signs.

Custom safety signs are also available. If you have a specific caution or warning message that you can’t see in our range, please contact our Customer Service Team to discuss your requirements.

Frequently Asked Questions

What traffic signs do I need for a construction site?

The types and quantity of traffic and vehicle signs needed to organise a construction or general worksite, or car park, will be site specific. Your site plan will help you to identify your total signage requirement, which may include road work signs UK, construction site entrance signs and direction signs (see the full list of categories in the guide above).

How do I keep pedestrians safe around construction sites?

Ensuring safe passage for pedestrians through a construction site is crucial due to the presence of heavy vehicles being controlled by drivers who may be concentrating on construction work, or who may have pedestrian blind spots. Our range includes directional signage for pedestrians to indicate safe routes and guide them to landmarks such as the reception or site office.

Where should construction site traffic signs be placed?

The positioning of construction site traffic signs and construction road signs should conform with HSE guidelines, which can be found in its Safety Signs and Signals publication. It is important to be aware of the correct placement for signs for both maximum visibility and to allow sufficient distance for drivers and pedestrians to note and react to any potential hazards ahead.

Whether you are using road work ahead signs, construction site entrance or please drive slowly signs, the advice is the same: always ensure that they are securely affixed and clearly visible to visitors approaching, whether on foot or in vehicles. Once installed, signs should be regularly checked for any visibility issues, which may be caused by vandalism, grime, or general wear and tear in external locations.